CPU: SC6610/20 Flash: SF_GD25Q32
CPU: SC6610/20 Flash: SF_GD25Q32
Chip=SpreadTrum
Action=Reset
FlashType=NOR
boot=6600L/WT6226-COM
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
FlashFile=LESUN D6303CPU: SC6610/20 Flash: SF_GD25Q32
Comport=COM37
Baudrate=115200
CPU_Type=SC6610/20
CPU_ID=66100000
NOR_ID=00C8004000160000
NOR_Size=4MB
NOR_Name=SF_GD25Q32
NOR_DieCnt=1
NAND_ID=
NAND_Size=
NAND_Name=
Initializing...
DA_LIB_VER_4.3.2.7
It is sensing the pinout fast...
RXD=7 TXD=6
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6610000000106A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 is ok
Reading phone HW info...
Read info is done.
CPU: SC6610/20 Flash: SF_GD25Q32
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Done.
Reset the user data area...
Note: if user partition size is more than 4MB, The phone would may take 1 minute to rebuild FileSystem after Reset Action.
All Done.
Here Is Your Flash File ( Take Backup If Phone Was In On Condition )
LESUN D6303 6610_GD25Q32
need 8mb flash file
here is log
Initializing...
DA_LIB_VER_4.3.6.8
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6610000000DA6A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 230400 is ok
Reading phone HW info...
Read info is done.
CPU: SC6610/20 Flash: SF_GD25Q64
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Reading Flash...
Saved file to:
C:\Documents and Settings\bipu\Desktop\ffffffffffffffffffffffffffff fffffffff
All Done.
Reading Project Version...
Platform Version: MOCOR_09A_MP.W11.16.03_Release
Project Version: SC6600L_6620
MMI Version: C715A_BLF_P023_64X32_M2_V05
BASE Version: BASE_10A.W11.15
HW Version: SC6620
Project Bulid Time: 2011-09-09 16:14:44
Initializing...
DA_LIB_VER_4.3.6.8
It is sensing the pinout fast...
RXD=12 TXD=3
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6610000000DA6A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 230400 is ok
Reading phone HW info...
Read info is done.
CPU: SC6610/20 Flash: SF_GD25Q64
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=869242003811989
IMEI 2=910575601400468
------Auto Format Address-------
Start=0x00770000
Size =0x00090000
Read FS info...done
thanks bro
its working
ankur
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks