Results 1 to 10 of 10

Thread: Process satisfactory with Easy JTag here:

  1. 02-09-2013, 07:46 AM #1
    Service Team
    Service Team is offline
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Cool Process satisfactory with Easy JTag here:

    Process satisfactory with Easy JTag here:

    This is a space that has been created to make the process successful with Easy JTag


    Any other message will be deleted
    Reply With Quote Reply With Quote
  2. 02-09-2013, 07:46 AM #2
    Service Team
    Service Team is offline
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default

    Test search pinout and connect S5230...

    Code:

    Box Working Mode: JTAG Box.
    Start Z3X Jtag Pin Finder...
    Successefuly connected to box on COM706
    Waiting for box reset...
    Box S/N: 00000000********
    Box Working Mode: JTAG Pin Finder.
    Start Z3X Jtag Pin Finder...
    Stage 1: Search TCK / TMS / TDI / TDO...
    Try to get IDCODE...
    JTAG Pinout Found: TCK: Pin 11 / TMS: Pin 1 / TDI: Pin 9 / TDO: Pin 7
    Found device with IDCODE=0x7926F0F
    Stage 2: Search TRST...
    TRST Pin Found: TRST: Pin 13
    Box S/N: 0D0DFF182DBE7A08
    Box Working Mode: JTAG Box. 10:38:47

    For support and updates visit EasyJtag , just better … - New powerful JTAG unbrick device.
    I/O Level set to : 3000 mV
    Box S/N: 0D0D******,SW Ver.: 01.42
    Connecting to Target...
    JTAG device: BCM2133
    CPU IDCODE detected: 0x07926F0F
    Manufacturer: 0x787, Part: 0x7926, Version: 0x0
    Halting CPU...
    Starting target communication...
    Detecting nand memory parameters of bank (0) ...
    NAND flash device ID:00EC:00BA 'NAND 256MiB 1.8V 16-bit (Samsung)' found
    NAND geometry: Blocks:00000800, Page size:2048 bytes , Block size:64 pages
    Reply With Quote Reply With Quote
  3. 02-09-2013, 07:47 AM #3
    Service Team
    Service Team is offline
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default

    S5230 easy repair boot...
    Code:

    Checking repair data...
    For support and updates visit EasyJtag , just better … - New powerful JTAG unbrick device.
    I/O Level set to : 3000 mV
    Box S/N: 0D0D******* ,SW Ver.: 01.42
    Connecting to Target...
    JTAG device: BCM2133
    CPU IDCODE detected: 0x07926F0F
    Manufacturer: 0x787, Part: 0x7926, Version: 0x0
    Halting CPU...
    Starting target communication...
    Detecting nand memory parameters of bank (0) ...
    NAND flash device ID:00EC:00BA 'NAND 256MiB 1.8V 16-bit (Samsung)' found
    NAND geometry: Blocks:00000800, Page size:2048 bytes , Block size:64 pages
    NAND Writing BOOT...
    NAND Write OK! Wrote up to offset 0x00080000 in 4,921875s (107,276 KiB/s)
    Repair DONE! Restarting phone...
    All Done.
    Box are disconnected!
    Reply With Quote Reply With Quote
  4. 02-09-2013, 07:47 AM #4
    Service Team
    Service Team is offline
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default

    i917 write fullflash succesfully done

    Code:

    EasyJtag Suite ver. 1.0.18.2 started.
    For support and updates visit EasyJtag , just better … - New powerful JTAG unbrick device.
    I/O Level set to : 2600 mV
    Box S/N: ********** ,SW Ver.: 01.42
    Connecting to Target...
    JTAG device: QSD8250.
    CPU IDCODE : 0x1BA000E1 Mfg.: 0x070, Part: 0xba00, Ver.: 0x1
    CPU Manufacturer: QUALCOMM , CPU Name: QSD8250 SLAVE
    JTAG device: QSD8250.
    CPU IDCODE : 0x202400E1 Mfg.: 0x070, Part: 0x0240, Ver.: 0x2
    CPU Manufacturer: QUALCOMM , CPU Name: QSD8250
    Initialize hardware...
    Starting target communication...
    Detecting nand memory parameters ...
    NAND flash device ID:002C:00B3 'NAND 1GiB 1.8V 16-bit (Micron)' found
    NAND geometry: Blocks:00002000, Page size:2048 bytes , Block size:64 pages
    Writing NAND from file...D:\1GB_Z3X.bin
    Lock file not found D:/1GB_Z3X.lock
    NAND Write OK! Wrote up to offset 0x40000000 in 3846.583008s (281.118 KiB/s)
    Reply With Quote Reply With Quote
  5. 02-09-2013, 07:48 AM #5
    Service Team
    Service Team is offline
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default

    I9100 sucesfull JOB done using Easy JTAG

    Code:

    EasyJtag Suite ver. 1.0.24.0 started.
    Successefuly connected to box on COM48
    Box S/N: XXXXXXXXXXXXXXXXx, ,FW Ver.: 01.44
    Box Working Mode: JTAG Box.
    Z3X Card Serial : XXXXXXXXX
    Z3X Card Version : 22
    Z3X Card Activation [JTAG] : 1
    Resources ver. : MainRC ver.OCD040Z001 ©2012 z3x-team.com
    Loading repair file: 'C:\Program Files\Z3X\EASYJTAG\Repair Files\Samsung GT-i9100.rcp'
    Repair File ver. : Easy Repair for Mfg: SAMSUNG Model: GT-I9100, Ver.: 1.00
    Easy-Repair file load OK!
    Using EasyRepair Mode...
    Checking repair data...
    EasyJtag Suite ver. 1.0.24.0 started.
    For support and updates visit EasyJtag , just better … - New powerful JTAG unbrick device.
    Initialising: SAMSUNG GT-I9100 Config ver.:1.00
    I/O Level set to : 2800 mV
    Box S/N: 10100007B9800571 ,FW Ver.: 01.44
    Connecting to Target...
    JTAG device: S5PC210
    CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4
    CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9
    Halting CPU...
    Init target ...
    Starting target communication...
    Detecting emmc memory parameters of bank (0) ...
    EMMC #0 : ID : 0x00010015 Name : VYL00M Size : 16 GB
    EMMC #1 : ID : 0x00010015 Name : VYL00M Size : 524 kB
    eMMC flash device(s) found, Device ID : 0x00150001
    NAND Writing GPT...
    eMMC Write OK! Elapsed time: 9.015625s (454.322 KiB/s)
    NAND Writing SBL1...
    eMMC Write OK! Elapsed time: 12.234375s (104.623 KiB/s)
    NAND Writing SBL2...
    eMMC Write OK! Elapsed time: 12.046875s (106.252 KiB/s)
    NAND Writing PARAM...
    eMMC Write OK! Elapsed time: 27.609375s (296.711 KiB/s)
    NAND Writing ROM2...
    eMMC Write OK! Elapsed time: 1.421875s (360.088 KiB/s)
    All Done.
    Reply With Quote Reply With Quote
  6. 02-09-2013, 07:48 AM #6
    Service Team
    Service Team is offline
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default

    Programming s5830i



    Finder
    Code:

    Start Z3X Jtag Pin Finder...
    Successefuly connected to box on COM68
    Waiting for box reset...
    Box S/N: 000000000*******
    Box Working Mode: JTAG Pin Finder.
    Start Z3X Jtag Pin Finder...
    Stage 1: Search TCK / TMS / TDI / TDO...
    Try to get IDCODE...
    JTAG Pinout Found: TCK: Pin 11 / TMS: Pin 3 / TDI: Pin 9 / TDO: Pin 13
    CPU IDCODE : 0x07B3617F Mfg.: 0x0bf, Part: 0x7b36, Ver.: 0x0
    CPU Manufacturer: SST/Broadcom , CPU Name: BCM21553
    Stage 2: Search TRST...
    TRST Pin Found: TRST: Pin 1
    Box S/N: **********
    Box Working Mode: JTAG Box.

    Dump 64Mb

    Code:

    For support and updates visit EasyJtag , just better … - New powerful JTAG unbrick device.
    I/O Level set to : 3000 mV
    Box S/N: **************,SW Ver.: 01.42
    Connecting to Target...
    Warn: JTAG device: BCM21553
    CPU IDCODE : 0x07B3617F Mfg.: 0x0bf, Part: 0x7b36, Ver.: 0x0
    Warn: CPU Manufacturer: SST/Broadcom , CPU Name: BCM21553
    Halting CPU...
    Initialize hardware...
    Starting target communication...
    Detecting nand memory parameters ...
    NAND flash device ID:00EC:0050 'NAND 4GiB 1.8V 16-bit (Samsung)' found
    NAND geometry: Blocks:00002000, Page size:4096 bytes , Block size:64 pages
    Accesing logical device region # 0
    Working block has an 256 pages , allocating 135168 bytes of memory
    Reading 04000000 bytes from NAND adress 00000000...
    Dumped 69206016 bytes in 458,401215s (147,434 KiB/s) OK.
    Reply With Quote Reply With Quote
  7. 02-09-2013, 07:48 AM #7
    Service Team
    Service Team is offline
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default

    GT540 very fast&easy repaired.
    LG GT540 repaired usign Easy JTAG

    Code:

    EasyJtag Suite ver. 1.0.24.0 started.
    Successefuly connected to box on COM48
    Box S/N: 10100007B9800571, ,FW Ver.: 01.44
    Box Working Mode: JTAG Box.
    Z3X Card Serial : XXXXXXXX
    Z3X Card Version : 22
    Z3X Card Activation [JTAG] : 1
    Resources ver. : MainRC ver.OCD040Z001 ©2012 z3x-team.com
    Loading repair file: 'C:\Program Files\Z3X\EASYJTAG\Repair Files\LG GT540.rcp'
    Repair File ver. : Easy Repair for Mfg: LG Model: GT-540, Ver.: 1.00
    Easy-Repair file load OK!
    Using EasyRepair Mode...
    Checking repair data...
    EasyJtag Suite ver. 1.0.24.0 started.
    For support and updates visit EasyJtag , just better … - New powerful JTAG unbrick device.
    Initialising: LG GT-540 Config ver.:1.00
    I/O Level set to : 2600 mV
    Box S/N: XXXXXXXXXXXXXX ,FW Ver.: 01.44
    Connecting to Target...
    JTAG device: MSM7200A
    CPU IDCODE : 0x203C00E1 Mfg.: 0x070, Part: 0x03c0, Ver.: 0x2
    CPU Manufacturer: QUALCOMM , CPU Name: MSM7227
    Halting CPU...
    Initialize hardware...
    Starting target communication...
    Detecting nand memory parameters ...
    NAND flash device ID:00EC:00BC 'NAND 512MB 1.8V 16-bit (Samsung)' found
    NAND geometry: Blocks:00001000, Page size:2048 bytes , Block size:64 pages
    NAND Writing MIBIB...
    NAND Write OK! Elapsed time: 12.251098s (104.480 KiB/s)
    NAND Writing QCSBL...
    NAND Write OK! Elapsed time: 2.468971s (103.687 KiB/s)
    NAND Writing OEMSBL1...
    NAND Write OK! Elapsed time: 6.000537s (106.657 KiB/s)
    NAND Writing OEMSBL2...
    NAND Write OK! Elapsed time: 6.063044s (105.558 KiB/s)
    Repair DONE! Restarting phone...
    All Done.
    Reply With Quote Reply With Quote
  8. 02-09-2013, 07:49 AM #8
    Service Team
    Service Team is offline
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default

    P1000 repair succesful
    Code:

    EasyJtag Suite ver. 1.0.36.0 started.
    For support and updates visit EasyJtag , just better … - New powerful JTAG unbrick device.
    Initialising: SAMSUNG GT-P1000 Config ver.:1.00
    I/O Level set to : 2800 mV
    Box S/N: 1616FD19C1759CEB ,FW Ver.: 01.44
    Connecting to Target...
    JTAG device: S5PC110
    CPU IDCODE : 0x1BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x1
    CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A8
    Halting CPU...
    Initialize hardware...
    Starting target communication...
    Detecting nand memory parameters ...
    NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found
    NAND geometry: Blocks:00000800, Page size:1024 bytes , Block size:256 pages
    Loading repair file: 'C:\Documents and Settings\HTS\Desktop\New Folder (2)\Samsung GT-P1000.rcp'
    Repair File ver. : Easy Repair for Mfg: SAMSUNG Model: GT-P1000, Ver.: 1.00
    Easy-Repair file load OK!
    Using EasyRepair Mode...
    Checking repair data...
    EasyJtag Suite ver. 1.0.36.0 started.
    For support and updates visit EasyJtag , just better … - New powerful JTAG unbrick device.
    Initialising: SAMSUNG GT-P1000 Config ver.:1.00
    Connecting to Target...
    Target not found , check power and connection! , Error code:-1
    Using EasyRepair Mode...
    Checking repair data...
    EasyJtag Suite ver. 1.0.36.0 started.
    For support and updates visit EasyJtag , just better … - New powerful JTAG unbrick device.
    Initialising: SAMSUNG GT-P1000 Config ver.:1.00
    I/O Level set to : 2800 mV
    Box S/N: 1616FD19C1759CEB ,FW Ver.: 01.44
    Connecting to Target...
    JTAG device: S5PC110
    CPU IDCODE : 0x1BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x1
    CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A8
    Halting CPU...
    Initialize hardware...
    Starting target communication...
    Detecting nand memory parameters ...
    NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found
    NAND geometry: Blocks:00000800, Page size:1024 bytes , Block size:256 pages
    NAND Writing BOOT...
    NAND Write OK! Elapsed time: 1.140625s (231.452 KiB/s)
    NAND Writing PIT...
    NAND Write OK! Elapsed time: 0.562500s (469.333 KiB/s)
    NAND Writing SBL1...
    NAND Write OK! Elapsed time: 7.890625s (167.287 KiB/s)
    NAND Writing SBL2...
    NAND Write OK! Elapsed time: 7.812500s (168.960 KiB/s)
    NAND Writing UPCH...
    NAND Write OK! Elapsed time: 0.937500s (1126.400 KiB/s)
    All Done.
    Reply With Quote Reply With Quote
  9. 02-09-2013, 07:49 AM #9
    Service Team
    Service Team is offline
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default

    Samsung B229 Blinking Repair By Z3X EasyJtag

    EasyJtag Suite ver. 1.0.36.0 started.
    For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
    Initialising: Samsung SCH-B229 Config ver.:1.00
    I/O Level set to : 2600 mV
    Box S/N: 0F0F0F194E57C4A3 ,FW Ver.: 01.44
    Connecting to Target...
    JTAG device: QSC1100
    CPU IDCODE : 0x122CE0E1 Mfg.: 0x070, Part: 0x22ce, Ver.: 0x1
    CPU Manufacturer: QUALCOMM , CPU Name: QSC11x0
    Halting CPU...
    Initialize hardware...
    Starting target communication...
    Detecting NOR memory parameters of bank (0) ...
    NOR FlashID:00EC:227A 'K5L6331CAA 8MB (Samsung)' found
    Writing memory from file...G:\All\Z3X\Easy Jtag\Samsung_SCH-B229_CDMA_8MB.bin
    NOR Write OK! Elpsed time: 204.718750s (40.016 KiB/s)
    Reply With Quote Reply With Quote
  10. 02-09-2013, 07:50 AM #10
    Service Team
    Service Team is offline
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default

    u7510 dump and repair.
    Code:

    EasyJtag Suite ver.: 1.0.39.0 started.
    Operating system ver.: Windows 7 (build 7601, Service Pack 1), 64-bit edition.
    For support and updates visit EasyJtag , just better … - New powerful JTAG unbrick device.
    Initialising: Huawei U7510S Config ver.:1.00
    I/O Level set to : 2600 mV
    Box S/N: 4B484F685 ,FW Ver.: 01.44
    Connecting to Target...
    JTAG device: QSC6270
    CPU IDCODE : 0x4015F0E1 Mfg.: 0x070, Part: 0x015f, Ver.: 0x4
    CPU Manufacturer: QUALCOMM , CPU Name: QSC6240
    Halting CPU...
    Initialize hardware...
    Starting target communication...
    Detecting nand memory parameters ...
    NAND flash device ID:00EC:00BA 'NAND 256MB 1.8V 16-bit (Samsung)' found
    NAND geometry: Blocks:00000800, Page size:2048 bytes , Block size:64 pages
    Reading dump to file...D:\Jtag\U7519\nand_dump_00000000_10000000_t argetname.bin
    Reading 10000000 bytes from NAND adress 00000000 PAGE:0200 SPARE:10
    Dumped 276824064 bytes in 1592.364136s (169.770 KiB/s) OK.
    Loading repair file: 'C:\Users\Дима\Downloads\Huawei U7510s.rcp'
    Repair File ver. : Easy Repair for Mfg: Huawei Model: U7510S, Ver.: 1.00
    Easy-Repair file load OK!
    Using EasyRepair Mode...
    Checking repair data...
    EasyJtag Suite ver.: 1.0.39.0 started.
    Operating system ver.: Windows 7 (build 7601, Service Pack 1), 64-bit edition.
    For support and updates visit EasyJtag , just better … - New powerful JTAG unbrick device.
    Initialising: Huawei U7510S Config ver.:1.00
    I/O Level set to : 2600 mV
    Box S/N: B484F685 ,FW Ver.: 01.44
    Connecting to Target...
    JTAG device: QSC6270
    CPU IDCODE : 0x4015F0E1 Mfg.: 0x070, Part: 0x015f, Ver.: 0x4
    CPU Manufacturer: QUALCOMM , CPU Name: QSC6240
    Halting CPU...
    Initialize hardware...
    Starting target communication...
    Detecting nand memory parameters ...
    NAND flash device ID:00EC:00BA 'NAND 256MB 1.8V 16-bit (Samsung)' found
    NAND geometry: Blocks:00000800, Page size:2048 bytes , Block size:64 pages
    NAND Writing MIBIB...
    NAND Write OK! Elapsed time: 11.563661s (114.151 KiB/s)
    NAND Writing FSBL...
    NAND Write OK! Elapsed time: 8.100463s (114.068 KiB/s)
    NAND Writing OSBL...
    NAND Write OK! Elapsed time: 4.654266s (113.444 KiB/s)
    All Done.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Easy-Jtag(Z3X-Pro) - what is this?
    By Service Team in forum Easy Jtag (By Z3x Team)
    Replies: 0
    Last Post: 02-09-2013, 07:44 AM
  2. Easy-JTAG 1.0.62.2 Update - Easy Partition scripts added.
    By Service Team in forum Gsm Updates & News
    Replies: 0
    Last Post: 31-08-2013, 06:20 AM
  3. EASY-JTAG. BOOM & Revolution. Come here :)
    By Yash_MobileCare in forum Gsm Updates & News
    Replies: 0
    Last Post: 11-05-2013, 05:24 PM
  4. Easy-Jtag - New fantastic box from z3x team released
    By Pak_mobile in forum Z3X-Team Products
    Replies: 0
    Last Post: 11-05-2013, 03:31 PM
  5. how to replace connector in easy process
    By bidyut135 in forum Samsung Hardware Repair Section
    Replies: 0
    Last Post: 11-02-2013, 11:53 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules