Hey I bricked my lg optimus 3d..D: Could someone plz help

[divraj]

Bricked my Lg p920 (optimus 3d)

[jamesjerss]

This guide requires that you have installed correct LG DRIVERS and you have a working NORMAL LG USB CABLE also you need to do this with a good battery.

You will need to download the following tools.

WKPARKS omap4boot port of SU760/SU870 + u-boot port of SU760/SU870 from here

LGFlashTool Tutorial installation Here

RECOVERY ROMS:

P920 users should use BOOTV21E.RAR FROM HERE

(BOOTV21E has all necessary partitions to FULLY REPAIR your P920 with V21E ROM files including CWM TOUCH RECOVERY)

PROCEDURE

Before you start READ THE GUIDE once so you can understand it and then proceed with repair.

Step1.

Install LGflashtool (also copy/paste crack)

P920 users should run LG FlashTool and load BOOTV21E_AP.bin (ONLY THE AP.BIN FILE) and keep it open but NOT ready for flashing.

Step 2.

Extract WKPARKS omap4boot and follow installation steps:

Install OMAP4430 USB driver

After driver installation ends remove usb cable BUT keep windows device manager open.

Step 3. Run start_fastboot.bat and select option 2

Step 4. Pull out battery

Step 5. Hold Vol+

Step 6. Connect USB cable, the usbboot will start

Step 7. Insert battery while the usbboot is waiting



Step 8. Script tells you to remove cable but i dont think it's necessary in this version

Step 9. Release Vol+ and look in your Windows Device manager
If everything worked ok your phone got recognised and now you are in downoad mode.





Step 11. Remove cable and battery from P920/SU760

Step 12. Set LG FlashTool ready for flashing.

Step 13. Run Steps 3-9 again and you will see your phone being flashed from LG FlashTool.
It will be stopped at 26-30% because phone will turn off on its own BUT the next time you try to enter NORMAL DOWNLOAD MODE it will be available again.

Step 14. Set LG FlashTool ready to flash your P920 with BOOTV21E_AP.bin again.

Step 15. Put your phone in DOWNLOAD MODE without using omap4boot this time.

Step 16. LG FlashTool will recognise the phone and flash it completely this time.
P920 after reboot will go to CWM. You can flash your personal backup or reboot to STOCK V21E.

Step 17. After repairing your P920 YOU PROBABLY HAVE TO FIX YOUR IMEI...(and maybe your wifi mac address) follow these steps:

Originally Posted by josuelopezv View Post
Restoring IMEI
1.Connect phone by USB
2.Activate USB debug mode
3.Enter 3845#*920# in dialer if that doesn’t work try 3845#*925# or 3845#*720# if device is SU760
4.Select Port Settings -> Select CP Image Download
5.A new device should appear at let it install
6.Open Tutty (or hyperterminal) and select serial protocol. Click on open
7.Type AT if response is not OK, change port number (it is possible that when typing you don’t see any letters)
8.Type at%imei, it should display a dummy IMEI
9.Type at%imei=x,x,x,x,x,x,x,x,x,x,x,x,x,x,x where x,x,x... is your orginal IMEI number (found under the battery of your phone). It should response IMEI WRITE OK
10.Reboot phone

If you don't understand how to do this read this thread [GUIDE] Unlock Phone / Recover IMEI

Extra Step for P920 User's

After procedure ends use the rebooter utility and select option 2 like below..

A Small Guide if Anyone has troubles installing Omap4430 Driver in Windows 7

When plugging the phone in,find OMAP4430 in "Other Devices" in Device Manager.



Right click on OMAP4430,then click "Update Driver Software..."
Then browse to your omap4boot 1.8 folder that you have extracted from zip



Choose the usb_drv_windows folder and click OK



While installing the driver,ignore any warning messages



After installation finished you will be able to ressurect your phone

[jper207]

IM Always having these problems with l.G. PRODUCTS I NEED A NEW PHONE