How To Update Samsung S5222 Star 3 Duos Firmware Using USB Cable And FlashTool
Firmware Update Steps:
- Turn your Samsung S5222 off, And take its battery, SIM cards, And MMC card out.
- From the flasher folder run FlashTool_E2 exe
- To Select the Firmware files from its extracted folder click on (...) button,You have to do so for each file.
- The selecting of firmware files must be in the below order:
- S5222xxxxx_psi.fls
- S5222xxxxx_slb.fls
- S5222xxxxx_bin.fls
- S5222xxxxx_cds.fls
- S5222xxxxxx.dffs
- Now Check these settings:
Custom Order (Must be checked).
Erases Calibration! : Select (Erase whole flash before download).
Baud Rate: 921600
Communication Driver: Infineon USB Driver.
- Now you can click on Next button, And a new window will appear.
- Click on Start USB1 button.
- Now you have to connect your Samsung S5222 to PC using the USB cable.
- There are more than one way to connect your phone, You can try any one of the following:
1- With the phone's battery in, Press and hold Home key then connect the USB cable to it.
2- With the phone's battery in, Press and hold Volume Down + Volume Up keys, Then connect the USB cable to it.
3- Connect the USB cable to phone without battery, After it is detected you can insert the battery.
- After the FlashTool starts the update process you have to wait for some minutes.
- When the operation is done, You will see a Success word, And that means it was done right.
- Disconnect the USB cable from phone.
- With your Samsung Star 3 Duos on
FlashTool_E2:::::::Hotfile.com: One click file hosting: C3750_C3650_FlashTool_E2_XMM2150.rar
firmware:::
S5222 Star 3 Duos
Bookmarks