How To Update Samsung Using USB Cable

[Service Team]

How To Update Samsung T999 Galaxy S3 Firmware By Using Odin Flasher


Turn off your GS3 T999, Take its battery, SIM card, And MMC card out.

- Run Odin.exe

- By default the Auto Reboot and F.Reset Time are checked, So keep them checked.

- Open the extracted firmware folder and you will see one big file inside it:

For T999: T999UVDLJC_T999TMBDLJC_T999UVDLJC_HOME.tar.md5

For T999v: KIES_HOME_T999VVLDLL1_T999VYVLDLL1_CL616748_REV04_ user_low_ship.tar.md5

- The files we mentioned are only as example, You can use any version you want.

- Now click on PDA button at Odin's window and select the above firmware file.

- Put the battery into your phone, But do not turn it on.

- To put your GS3 T999 into download mode follow these steps:

Press and Hold Volume Down key, Then press Power key until you get the warning message on your phone's screen.

- Release both keys and press Volume Up key to be in Download Mod

Firmware t999:::

T999UVDLJA / TMBDLJA USA T-Mobile






Firmware t999v:::

T999VVLDLL1 / YVLDLL1 GLW Canada Wind Mobile

- T999VVLDLL1 / YVLDLL1 MCT Canada Mobilicity

- T999VVLDLL1 / YVLDLL1 VTR Canada Videotron

Flasher:::

Odin307 - Download - 4shared

[Service Team]

How To Update Samsung T999 Galaxy S3 Firmware By Using Odin Flasher


Turn off your GS3 T999, Take its battery, SIM card, And MMC card out.

- Run Odin.exe

- By default the Auto Reboot and F.Reset Time are checked, So keep them checked.

- Open the extracted firmware folder and you will see one big file inside it:

For T999: T999UVDLJC_T999TMBDLJC_T999UVDLJC_HOME.tar.md5

For T999v: KIES_HOME_T999VVLDLL1_T999VYVLDLL1_CL616748_REV04_ user_low_ship.tar.md5

- The files we mentioned are only as example, You can use any version you want.

- Now click on PDA button at Odin's window and select the above firmware file.

- Put the battery into your phone, But do not turn it on.

- To put your GS3 T999 into download mode follow these steps:

Press and Hold Volume Down key, Then press Power key until you get the warning message on your phone's screen.

- Release both keys and press Volume Up key to be in Download Mod

Firmware t999:::

T999UVDLJA / TMBDLJA USA T-Mobile






Firmware t999v:::

T999VVLDLL1 / YVLDLL1 GLW Canada Wind Mobile

- T999VVLDLL1 / YVLDLL1 MCT Canada Mobilicity

- T999VVLDLL1 / YVLDLL1 VTR Canada Videotron

Flasher:::

Odin307 - Download - 4shared

[Service Team]

How To Update Samsung S5222 Star 3 Duos Firmware Using USB Cable And FlashTool

Firmware Update Steps:

- Turn your Samsung S5222 off, And take its battery, SIM cards, And MMC card out.

- From the flasher folder run FlashTool_E2 exe

- To Select the Firmware files from its extracted folder click on (...) button,You have to do so for each file.

- The selecting of firmware files must be in the below order:

- S5222xxxxx_psi.fls
- S5222xxxxx_slb.fls
- S5222xxxxx_bin.fls
- S5222xxxxx_cds.fls
- S5222xxxxxx.dffs

- Now Check these settings:

Custom Order (Must be checked).
Erases Calibration! : Select (Erase whole flash before download).
Baud Rate: 921600
Communication Driver: Infineon USB Driver.

- Now you can click on Next button, And a new window will appear.

- Click on Start USB1 button.

- Now you have to connect your Samsung S5222 to PC using the USB cable.

- There are more than one way to connect your phone, You can try any one of the following:

1- With the phone's battery in, Press and hold Home key then connect the USB cable to it.

2- With the phone's battery in, Press and hold Volume Down + Volume Up keys, Then connect the USB cable to it.

3- Connect the USB cable to phone without battery, After it is detected you can insert the battery.

- After the FlashTool starts the update process you have to wait for some minutes.

- When the operation is done, You will see a Success word, And that means it was done right.

- Disconnect the USB cable from phone.

- With your Samsung Star 3 Duos on

FlashTool_E2:::::::Hotfile.com: One click file hosting: C3750_C3650_FlashTool_E2_XMM2150.rar

firmware:::

S5222 Star 3 Duos

- S5222XXLAF / XELAE Russia

- S5222XELC3 Russia

- S5222XELL1 Russia