In this tutorial, you will find how to use the new script features for reading partitions, making your own backups for repairing phones and writing them. Using scripts is very easy. Please check each step carefully so that you wont miss anything.
1) Start Easy JTAG program and switch to the JTAG Flasher tab.
2) Select brand type and MCU, in my case m using Galaxy S3 R530U, so most of the similar phones init will work with this phone too. Hence i have selected SPH-L710.
3) Click Connect to device and check log for successful connection.
4) Now go to your Easy-JTAG installation directory, in my case it was H:\Mobiles\Z3x\EasyJTAG\ . Now go to scripts folder and copy file named "Show_Paritions_EMMC_GPT.txt".
5) Make a new folder some where with model name of the phone of which you are going to take backup, I made folder on my desktop as "R530". Paste the "Show_Paritions_EMMC_GPT.txt" file inside this folder.
6) Now in program, click on Run Script, and select the "Show_Paritions_EMMC_GPT.txt" files in the R530 folder you created. It will show log output in program if you have selected proper partitioning script. This will create 2 new files in the R530 folder, i.e. "dump_partitions.txt" and "write_partitions.txt".
7) Now open dump_partitions.txt and de-select partitions which you dont want to flash/restore/backup. You need to add # in the start of each partition, in this case, we are not going to backup MODEM,BOOT,SYSTEM,USERDATA,CACHE and GROW so i have added # in the start of each line.
Next....................
Bookmarks